Shailesh Pipe Fittings

We offer high quality, high performance copper and brass fittings and accessories.  These are used and installed in VRF (variable refrigerant flow), VRV (variable refrigerant volume), Chillers and Air-conditioning units.

We offer wide range of refrigeration and air-conditioning copper and brass fittings and accessories with required specifications, size, gauge etc.

Copper fittings are most often used for the supply of hot and cold tap water, and as a refrigerant line in HVAC systems.

Material: Copper

Hollow Sections: Circular

Usage/Application: Heat Exchanger, condensor, evaporators, chillers

Grade: Commercial Grade

Finishing: Polished

Surface finish: Polished

The Air Conditioning Copper Tubes that we manufacture are extensively used in Air conditioning systems. The use of copper tube in air-conditioning and refrigeration systems has grown steadily in recent years.

This is the general-purpose copper tube for above ground services. Ideal for Drinking Water, Central Heating, Sanitation, Hot and Cold Water, Industrial & Medical Gas Transportation, Various Engineering.

Types Of Tubes
1- Plain Tubes:

• Outer Diameter: 4.76mm to 150mm
• WT: 0.35mm to 3.0mm
• Straight Length: Up to 6 MTRS

2-Pancake Coils Single Layer

• Outer Diameter: 4.76mm to 19.05mm
• Wall: 0.41mm & 1.24mm
• Length: 15 MTRS

3-Double Layer

• Outer Diameter: 4.76mm to 19.05mm
• Wall: 0.41mm & 1.24mm
• Length: 15 MTRS & 30 MTRS

4-Connecting Tube Coil Sets for Split ACS

• Outer Diameter: 4.76mm to 19.05mm
• Length: 5 MTRS or as per customer's requirement

5-Internally Grooved Tubes

• Outer Diameter: 9.52mm
• Wall: 0.35mm & 0.30mm
• No. of grooves: As per Japanese standards

6-Double Layer

• Outer Diameter: 1.5mm to 3mm
• Wall: 0.30mm & 0.6mm
• Length: Straight lengths as per customer needs

We Supply to Our Clients Air Conditioning Copper Tubes in India as well as Abroad. 

 we proudly  Medical Grade Copper Pipe used in Medical Gas Distribution system. Uninterrupted Medical Gas supply is a necessity in hospitals (ICCU, Operation Theater, Wards, and Nursery etc.) Pipes facilitate this in most effective manner.

 Medical grade copper tubes are manufactured as per EN13348/ BS EN 1057 specifications. The pipes are manufacturer under thorough inspections and quality control measures.

 Medical grade copper tubes are available in size range 6mm to 108mm OD, 0.6mm to 2.0mm wall thickness in Half Hard/Hard condition and length 3 meter or as per requirement.

pipes are subjected to TPI by reputed agencies like Lloyds Register, SGS, and TUV as per customer demand.

TYPICAL USES for EN 13348 Medical Grade Copper Pipes- MGPS:
Medical Gas Distribution System for uninterrupted medical gas supply in hospital (ICCU, Operation Theater, Wards, Nursery etc.)

• The Integral Low Fin Tubes is a tube where the external surface of the tube is enhanced by the process of finning and fins are drawn from the base material of the tube, resulting to increase in the surface area by 2.5 times than the plain tube area. The Extruded surface achieved through our manufacturing process is real and uniform.

Characteristics:

• Fin Tubes are fully integrated so that the Heat Transfer, performance, life and resistance to vibration are excellent. Fin Tubes can improve the thermal performance of a Heat Exchanger without changing in Shell size, Flow Arrangement and Repositioning of tubing. Integral Low Fin Tubes have a very large Heat Transfer ratio thus it is possible to reduce the volume, weight of the Heat Exchangers and finally reduce the cost.

Application:

• Integral Fin Tubes can be used in various Heat Exchanger Applications, Viz. Condensers, Chillers, Oil Coolers and Shell & Tube type Heat Exchangers, etc.

• The Integral Low Fin Tubes is a tube where the external surface of the tube is enhanced by the process of finning and fins are drawn from the base material of the tube, resulting to increase in the surface area by 2.5 times than the plain tube area. The Extruded surface achieved through our manufacturing process is real and uniform.

Characteristics:

• Fin Tubes are fully integrated so that the Heat Transfer, performance, life and resistance to vibration are excellent. Fin Tubes can improve the thermal performance of a Heat Exchanger without changing in Shell size, Flow Arrangement and Repositioning of tubing. Integral Low Fin Tubes have a very large Heat Transfer ratio thus it is possible to reduce the volume, weight of the Heat Exchangers and finally reduce the cost.

Application:

• Integral Fin Tubes can be used in various Heat Exchanger Applications, Viz. Condensers, Chillers, Oil Coolers and Shell & Tube type Heat Exchangers, etc.